Mach5 Community Support
Solar Lamps - Printable Version

+- Mach5 Community Support (
+-- Forum: FastStats (/forumdisplay.php?fid=4)
+--- Forum: Questions and Troubleshooting (/forumdisplay.php?fid=5)
+--- Thread: Solar Lamps (/showthread.php?tid=812)

Solar Lamps - pata052t0 - 05-10-2018 07:42 PM

(Test condition: 1000W/m2, AM1.5, 25℃)
Maximum Power Watt130W135W140W145W
Production Tolerance
Maximum Power voltage V18.4318.5018.7918.97
Maximum Power currentA7.057.297.457.64
Open circuit voltageV22.0722.1422.4322.57
Short circuit currentA7.557.807.948.13
Cell Efficiency
NOCT (Nominal operating cell temperature)47℃(+2℃)
Temperature coefficient of Isc +0.05%/℃
Temperature coefficient of Voc-0.33%/℃
Temperature coefficient of power-0.5%/℃
Temperature coefficient of Im+0.05%/℃
Temperature coefficient of Vm-0.33%/℃
Temperature Range-40°C to +90°C
Max Load5400 Pa
Maximum system voltage1000V(TUV)/600V(UL)

Number of cells36pcs
Size of cells (wide and high)156mmx156mm
Front Glass3.2mm
Size of module (wide and high)1470*670*35mm
Weight per piece Kg12.0kg
Frame (type, material and thickness) Anodized aluminium alloy frame,35 thickness
Type of junction box IP65 with bypass diode
Cable type and length,
Connector type PV cable, 0.9m
MC4,Plug and socket

10 years product warranty
10 years power output ≥90%
25 years power output ≥80%Solar Lamps

RE: Solar Lamps - Kirian - 06-26-2018 12:01 PM

Thanks a lot for this information. Now our team from is searching for solar lamps for the head office.

RE: Solar Lamps - hamzakhan8021 - 07-11-2018 03:17 PM

A set of solar cells configured in such a way that at least 1.5V will be produced and supply 200ma. Higher voltage output is better so an additional cell would be used. Also, in reality, there is an even higher voltage requirement due to the use of a blocking Diode (more on this Later, read on) Individual solar cells produce roughly 0.5v each, cells are configured into a panel to obtain higher voltages by wiring individual cells in series. personal and social development Panels can also be wired in series-parallel combinations to obtain just about any voltage current you need. THe limiting factor being cost and size.